Three Kinds of UV printer machine Common Failure,Easy to Solve!

Three Kinds of UV printer machine Common Failure,Easy to Solve!

Blog Article

Since the listing, the UV printer machine with its small footprint, excellent printing results, large vary of printing and different benefits in a wide variety of fields have been used, preferred by means of the printing business. However, in the day by day use of UV printers, will inevitably stumble upon some troubles or failures, in the cease how to solve?
UV printer ink break
Failure phenomenon: UV printer in the technique of printing patterns, character nozzles out of ink, ensuing in the lack of coloration on the floor of the print.

Reason analysis: nozzle channel blockage, ink tablet blockage, terrible ink quality, nozzle running voltage is now not set properly.

Solution:
Use cleansing fluid to flush the nozzle holes, or use ultrasonic cleansing nozzle, unclogging the blocked nozzle;
Replace the superb ink to keep away from the printhead blocked again;
Adjust the printhead working voltage, till the UV printer no longer show up damaged ink phenomenon.
Printing system ink drops
Failure phenomenon: UV printing process, the printhead unexpectedly dripping ink, ensuing in ink spots on the screen.

Reason analysis: poor stress is too low, the ink gadget leakage, rubber ring dirty, too plenty ink in the ink cartridge

Solution:
Check whether or not the bad strain is too low, and modify to the country of non-dripping ink;
Check the articulation of the ink circuit device to see if there is air leakage;
Clean the rubber ring and substitute the historical rubber ring in time to make sure suitable sealing;
Check whether or not the ink content material in the exterior cartridge is too much.